Jump to content
Phantis Forums

Watch ERT SAT with TARBS Equipment


Recommended Posts

Paidia,

I have been able to use the TARBS equipment to catch ERT SAT on OPTUS B3. Below is a link which goes into full detail as it's a bit long to explain here.

Watch ERT Sat using TARBS Equipment

The bearings are for Perth, however if you go here you can get your own location bearings.

Hope this helps us watch some soccer in the next few months :D

Link to comment
Share on other sites

Guys,

I have had quite a few emails regarding people wanting their own cities' locations. I'll update Sydney and Melbourne soon, however the easiest way is look up yourn own suburbs' longitude, latitude by asking google.

Then go to http://www.sfwx.com/softworks/geoBearing.html

Enter the south value as negative

East value

Satellite point (optus b3) is 152

Good luck!

P.S.

Melbourne would be: 11 deg North and inclination (elevation) angle 45

Sydney would be: 2 deg North and inclination (elevation) angle 50

Link to comment
Share on other sites

  • 2 weeks later...

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...